Right Angle Overmolded RJ45 Connector - When installation space is limited this solution saves you time and money.

Right angle overmolded rj45 connector

If you can not use the straight RJ45 overmolded connector in your industrial automation ethernet network, for lack of space, then here is your solution. Turck has brought on the market since mid 2007 the right angle RJ45 connector, in an overmolded version.

Since the connector and cable are pre-assembled, this saves you time and removes possible faulty wiring, when you build your industrial network.

But not only in an industrial environment this solution can save a lot of time and money, also in the field of building automation you can think of possible applications, for example in the equipment of conference rooms.

Using this first-ever fully overmolded RJ45 connector will give you an advantage over your competitors. The cables are available 4 or 8 wire configurations,with or without shielding and with stranded conductors. The overmolding is done in tough polyurethane, the right angle RJ45 connector is available in a version with internal tabs, and in a version with external tabs.Full details can be found on www.turck-usa.com